Etac Ono Anweisungen zur Wiederaufbereitung - Seite 2

Blättern Sie online oder laden Sie pdf Anweisungen zur Wiederaufbereitung für Mobilitätshilfe Etac Ono herunter. Etac Ono 2 Seiten.

Check that the tyres, bearings and wheel axles are not

worn, and that the wheels turn easily.

Check the wheel attachment. The distance between

The ends of the retaining ring must not exceed 1 mm

(see diagram A) after installation on the wheel axle.

Careless installation may lead to the retaining ring being

pulled out of shape and not springing back to its original

shape.

≤ 1 mm

Sharp edge

≥ Ø9,4 mm

Etac

Box 203, 334 24 Anderstorp

Sweden

Tel +46 371 58 73 00

Fax +46 371 58 73 90

www.etac.com

Wheels/Wheel axles

Check that the retaining ring is properly fitted in the

groove. Always use a new retaining ring!

Check that the front forks rotate easily.

When changing wheels, check that the groove for the

retaining ring has a sharp edge (see diagram B), and that

there is no excessive wear where the wheel bearings turn

on the shaft. Minimum shaft

diameter is 9.4 mm.

2 (2)