CLINTON INDUSTRIES 199 Service-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Service-Handbuch für Trimmer CLINTON INDUSTRIES 199 herunter. CLINTON INDUSTRIES 199 16 Seiten.

II. TRIMMER INSTALLATION

A. PULLOFF ASSEMBLY

Remove the machine face plate and mount the Pulloff assembly as shown in INS-2377.

B. TENSION RELEASE AND PULLOFF ASSEMBLY

1. Remove from the machine the thread tension discs assembly and tension release

pin.

2. Drill and Tap mounting holes using appropriate drill fixture supplied. Refer to machine

drilling instructions shown in drawing INS-2355.

3. Mount tension release assembly and the thread tension discs assembly to the sewing

machine as shown in drawing INS-2353.

C. CUTTER AND WIPER ASSEMBLY

1. Remove from the machine throat plate and feed shaft clamp plate.

2. Rework clamp plate as shown in drawing INS-1630 and fasten to the machine.

3. Fasten cutter and wiper cylinder assembly to sewing machine bed.

4. Mount new throat plate assembly on the machine with original hook basket retaining

finger.

D. SOLENOID AIR VALVE CONTROL UNIT

1. Mount solenoid valve assembly in back of the machine bed as shown in INS-2379.

2. Mount foot lifter air cylinder assembly as shown in INS-2379.

E. NEEDLE COOLER

1. Fasten needle cooler tube to presser foot and roller housing bracket.

2. Mount treadle air valve assembly supplied between the motor and treadle arm.

F. FOLDER OPENER

1. Mount folder opener air cylinder assembly on bed of machine.

2. Assemble the folder opener assembly to the machine cylinder arm.

- 2 -

ML199-7