1010 Music Bitbox Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Synthesizer 1010 Music Bitbox herunter. 1010 Music Bitbox 11 Seiten.
Auch für 1010 Music Bitbox: Schnellstart-Handbuch (2 seiten)

Seite drucken

Load clip files from a microSD card

You can use the microSD card to load clips into bitbox from other sources.

1. Use your laptop or other device to load clips in WAV format into the root folder of a microSD card.

2. Insert the microSD card into the MICRO SD slot, notched edge down.

3. Press HOME until you get to the

4. Touch an empty, light colored cell in the grid on the touchscreen to select it.

5. Press the INFO button to display the

on-screen

Load

similar to the screen on the right.

6. Use any of the Control Knobs to select a WAV file from the list that appears on

the touchscreen. To cancel, press the HOME button.

7. Touch

Load

again. You will see the

Record a clip

You can use the IN1 and IN2 input jacks to record in mono or stereo.

1. Press HOME until you get to the

2. Touch an empty, light colored cell in the grid on the touchscreen to select it. You can delete a clip (see

Clip Actions above) to create an empty cell if needed.

3. Press the INFO button to display the

4. Plug the recording source into the IN1 or IN2 jack.

5. The source will play through the corresponding output jack, OUT1 or OUT2.

6. Turn the Control Knob closest to each of the following parameters to select a

value:

Input

Rec Quant

P. 6

v. 1.0

Main

button. A list of clips on the MicroSD card will be displayed,

Main

This parameter lets you select stereo or mono recording. The available values are as

follows:

In 1/2

●

In 1

Record mono from input jack IN1.

●

In 2

Record mono from input jack IN2.

●

This parameter lets you quantize the recording starting and stopping for making loops.

The available values are:

None - always start and stop immediately

●

1/16 - quantize to the next sixteenth note time

●

1/8 - eighth note

●

1/4 - quarter note

●

1/2 - half note

●

1 bar - a whole note assuming 4/4 time

●

2 bars

●

4 bars

●

8 bars

●

screen.

Clip Info

screen and then touch the

screen with the selected clip loaded into the selected cell.

screen.

Record

screen shown to the right.

Record in Stereo from input jacks IN1 and IN2.

Bitbox User Manual