1010 Music Bitbox Kullanıcı Kılavuzu - Sayfa 7
Sentezleyici 1010 Music Bitbox için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 1010 Music Bitbox 11 sayfaları.
Ayrıca 1010 Music Bitbox için: Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Load clip files from a microSD card
You can use the microSD card to load clips into bitbox from other sources.
1. Use your laptop or other device to load clips in WAV format into the root folder of a microSD card.
2. Insert the microSD card into the MICRO SD slot, notched edge down.
3. Press HOME until you get to the
4. Touch an empty, light colored cell in the grid on the touchscreen to select it.
5. Press the INFO button to display the
on-screen
Load
similar to the screen on the right.
6. Use any of the Control Knobs to select a WAV file from the list that appears on
the touchscreen. To cancel, press the HOME button.
7. Touch
Load
again. You will see the
Record a clip
You can use the IN1 and IN2 input jacks to record in mono or stereo.
1. Press HOME until you get to the
2. Touch an empty, light colored cell in the grid on the touchscreen to select it. You can delete a clip (see
Clip Actions above) to create an empty cell if needed.
3. Press the INFO button to display the
4. Plug the recording source into the IN1 or IN2 jack.
5. The source will play through the corresponding output jack, OUT1 or OUT2.
6. Turn the Control Knob closest to each of the following parameters to select a
value:
Input
Rec Quant
P. 6
v. 1.0
Main
button. A list of clips on the MicroSD card will be displayed,
Main
Main
This parameter lets you select stereo or mono recording. The available values are as
follows:
In 1/2
●
In 1
Record mono from input jack IN1.
●
In 2
Record mono from input jack IN2.
●
This parameter lets you quantize the recording starting and stopping for making loops.
The available values are:
None - always start and stop immediately
●
1/16 - quantize to the next sixteenth note time
●
1/8 - eighth note
●
1/4 - quarter note
●
1/2 - half note
●
1 bar - a whole note assuming 4/4 time
●
2 bars
●
4 bars
●
8 bars
●
screen.
Clip Info
screen and then touch the
screen with the selected clip loaded into the selected cell.
screen.
Record
screen shown to the right.
Record in Stereo from input jacks IN1 and IN2.
Bitbox User Manual
©1010music 2016