Dogtrace d-control easy Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt Dogtrace d-control easy herunter. Dogtrace d-control easy 19 Seiten. Electronic training collar
Seite druckenHow to check that your d–control works correctly
You can check anytime whether your set works correctly. Before the check, make sure that the
receiving collar is turned off.
Connect the leads of the testing discharge lamp to both contact points (loosen up the contact
points, insert the wires of the lamp under them so that they can be firmly held and then retighten
the contact points).
Turn on your remote controller and receiver.
Press down the button for sending a stimulation impulse. The testing discharge lamp will indicate
the receipt of the signal by a blink. The alteration of the intensity of the pulses according to options
1 to 4 will be indicated by a weaker or stronger light of the lamp.
At this moment, the stimulation impulse is only indicated by the light of the test discharge lamp, i.e.
the contact points do not emit any stimulation impulse.
Figure indicating the test lamp attached
11