ASG BLC-8020 Handbuch für Betrieb und Wartung - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Kraftschraubendreher ASG BLC-8020 herunter. ASG BLC-8020 10 Seiten. Brushless full auto shut-off
Seite drucken
1. Full auto shut-off screwdriver
The screwdriver stops automatically when the screw has been tightened to the set-up torque level.
(1) Trigger switch
The LED lights are on when the trigger switch has been pressed approximately one-third down, and then the
screwdriver starts functioning when the switch trigger has been pressed half way down; the driver it stops when the
screw has been tightened to the set-up torque level.
(2) Forward / Reverse switch
When the switch is turned to the right as arrow indicates, the screwdriver will be fastening clock-wise; Vice versa, when
the switch is turned to the left, the screwdriver will be operating counter-clockwise. As the diagram shows, always set the
switch to neutral position when the screwdriver is not being used.
(3) LED light
While pressing the trigger, the LED lights up automatically.
(4) Bit Sleeve
To insert the bit, pull the bit sleeve away from the tool, and slide in the bit. After installing the bit please install the torque
cover as shown in the diagram below.
Operation
6