Doka Shifting trolley DF Original Betriebsanleitung - Seite 11

Blättern Sie online oder laden Sie pdf Original Betriebsanleitung für Industrielle Ausrüstung Doka Shifting trolley DF herunter. Doka Shifting trolley DF 14 Seiten.

Seite drucken
Original Operating Instructions Shifting trolley DF
Assembly
C
D
A
E
A Extensions for Shifting trolley DF
B Shifting trolley DF
C Distance plate
D Safety clip
E Extension 1 (complete)
F Extension 2 (complete) - short side
G Hexagonal bolt M16x45
H Hexagon nut M16
I
Washer 17
K Drive unit for Shifting trolley DF
➤
Fix the Shifting trolley DF so that it cannot be moved
accidentally.(apply the fixing brakes, wedge the
wheels with chocks, etc.).
➤
Push the "Extensions for Shifting trolley DF" (A)
under the Shifting trolley DF.
➤
Extend the short "Extension" (F) by at least 50 mm.
➤
The short "Extension" (F) is on the same side as the
drive unit (K) .
9216-211-01
a ... 50 mm
➤
Fasten with hexagonal bolts M16x45 (G) , hexagon
nuts M16 (H) and washers 17 (I) .
x
G
H
I
9216-212-01
x ... play
If there is too much play between the U-profiles of
the Shifting trolley DF (B) and the "Extensions" (A) ,
the distance plates (C) must also be screwed on.
All 4 screws must be firmly tightened.
999216002 - 02/2020
G
H
I
F
B
K
F
a
B
C
A
Positioning under the tableform
CAUTION
➤
Always insert the fastening clamps of floor
props from the inside towards the outside,
otherwise they will get in the way of the Shift-
ing trolley when this is manoeuvred under
the tables.
➤
The "Extensions" must be mounted to the Shifting
trolley DF, with both extensions retracted (i.e.
pushed in).
➤
Wheel the Shifting trolley DF under the Dokaflex or
Dokamatic table, and position it.
Extending the "Extensions"
➤
Lift the Safety clip (D) .
➤
Pull out the wheel as far as it will go.
The Safety clip must snap into place.
Retracting the "Extensions"
➤
Lift the Safety clip (D) .
➤
Push the wheel back in as far as it will go.
The Safety clip must snap into place.
D
9216-210-01
D
11