Doka Shifting trolley DF 원본 사용 설명서 - 페이지 11
{카테고리_이름} Doka Shifting trolley DF에 대한 원본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Doka Shifting trolley DF 14 페이지.
페이지 인쇄Original Operating Instructions Shifting trolley DF
Assembly
C
D
A
E
A Extensions for Shifting trolley DF
B Shifting trolley DF
C Distance plate
D Safety clip
E Extension 1 (complete)
F Extension 2 (complete) - short side
G Hexagonal bolt M16x45
H Hexagon nut M16
I
Washer 17
K Drive unit for Shifting trolley DF
➤
Fix the Shifting trolley DF so that it cannot be moved
accidentally.(apply the fixing brakes, wedge the
wheels with chocks, etc.).
➤
Push the "Extensions for Shifting trolley DF" (A)
under the Shifting trolley DF.
➤
Extend the short "Extension" (F) by at least 50 mm.
➤
The short "Extension" (F) is on the same side as the
drive unit (K) .
9216-211-01
a ... 50 mm
➤
Fasten with hexagonal bolts M16x45 (G) , hexagon
nuts M16 (H) and washers 17 (I) .
x
G
H
I
9216-212-01
x ... play
If there is too much play between the U-profiles of
the Shifting trolley DF (B) and the "Extensions" (A) ,
the distance plates (C) must also be screwed on.
All 4 screws must be firmly tightened.
999216002 - 02/2020
G
H
I
F
B
K
F
a
B
C
A
Positioning under the tableform
CAUTION
➤
Always insert the fastening clamps of floor
props from the inside towards the outside,
otherwise they will get in the way of the Shift-
ing trolley when this is manoeuvred under
the tables.
➤
The "Extensions" must be mounted to the Shifting
trolley DF, with both extensions retracted (i.e.
pushed in).
➤
Wheel the Shifting trolley DF under the Dokaflex or
Dokamatic table, and position it.
Extending the "Extensions"
➤
Lift the Safety clip (D) .
➤
Pull out the wheel as far as it will go.
The Safety clip must snap into place.
Retracting the "Extensions"
➤
Lift the Safety clip (D) .
➤
Push the wheel back in as far as it will go.
The Safety clip must snap into place.
D
9216-210-01
D
11