Ashcroft GC35 Handbuch für Installation und Wartung - Seite 13
Blättern Sie online oder laden Sie pdf Handbuch für Installation und Wartung für Zubehör Ashcroft GC35 herunter. Ashcroft GC35 20 Seiten. Heavy duty digital pressure sensor
Auch für Ashcroft GC35: Schnellstart-Anleitung (4 seiten), Schnellstart-Anleitung (4 seiten)
Seite drucken
10. COMPArATOr SwITCH SeTTING MODe / lOOP CHeCK MODe
Setup Steps
Pressing the MODE
Setting/Loop Check Mode. Scroll through appropriate displays and select feature to change/con-
firm. LED ring will flash until this menu is exited to the Measurement Mode by holding the
MODE
key for more than 3 seconds.
Measurement Mode
MODE
Press less
than 3 sec.
Comparator Setting Mode
Loop Check Mode
Comparator 1 Use/No Use
(In Case of Intact)
Comparator 1 Setting Point A
Comparator 1 Setting Point B
Comparator 1 ON Delay
Comparator 1 OFF Delay
(In Case of Analog Output)
Comparator 2 Use/No Use
(In Case of Intact)
Comparator 2 Setting Point A
Comparator 2 Setting Point B
Comparator 2 ON Delay
Comparator 1 OFF Delay
Setting Storage of Comparator
Setting Loading of Comparator
Loop Check Mode
key for less than 3 seconds will display message within the Comparator
MODE
Press 3 sec.
or longer
US1
Message displayed
MODE
A-1
Message displayed
MODE
b-1
Message displayed
MODE
on1
Message displayed
MODE
oF1
Message displayed
MODE
US2
Message displayed
MODE
A-2
Message displayed
MODE
b-2
Message displayed
MODE
on2
Message displayed
MODE
on2
Message displayed
MODE
Sav
Message displayed
MODE
Lod
Message displayed
MODE
Lop
Message displayed
MODE
After 1 second
USE
Current setting
After 1 second
5. 0 0
Current setting
After 1 second
1. 0 0
Current setting
After 1 second
0. 0 0
Current setting
After 1 second
0. 0 0
Current setting
After 1 second
USE
Current setting
After 1 second
5. 0 0
Current setting
After 1 second
1. 0 0
Current setting
After 1 second
0. 0 0
Current setting
After 1 second
0. 0 0
Current setting
After 1 second
5-I
Storage Area Indication
After 1 second
L-1
Storage Area Indication
After 1 second
7. 5 2
Before mode shift
setting value
13
Select with
X W
keys
USE
In use
Not in use
X W
set any desired value within the
–1999 to 9999 range with UP/Down keys
X W
set any desired value within the
–1999 to 9999 range with UP/Down keys
X W
set any desired value within the
0 to 2 sec range with UP/Down keys
X W
set any desired value within the
0 to 2 sec range with UP/Down keys
Select with
X W
keys
USE
In use
Not in use
X W
set any desired value within the
–1999 to 9999 range with UP/Down keys
X W
set any desired value within the
–1999 to 9999 range with UP/Down keys
X W
set any desired value within the
0 to 2 sec range with UP/Down keys
X W
set any desired value within the
0 to 2 sec range with UP/Down keys
X W
Select
keys/reading by long pushing
5-I
Storage Area 1
Storage Area 2
X W
Select
keys/reading by long pushing
L-1
Storage Area 1
Storage Area 2
X W
key to select an arbitrary number
between -10 to 110%F.S. of the current
dispaly unit for simulating the pressure
noU
noU
5-2
l-2