Dolby Laboratories DP591 Schnellstart-Handbuch - Seite 15
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Medienkonverter Dolby Laboratories DP591 herunter. Dolby Laboratories DP591 19 Seiten. Object authoring tool
Auch für Dolby Laboratories DP591: Schnellstart-Handbuch (9 seiten)
Seite drucken
4.6 Setting production renderers
Set the production renderers to create a legacy transmission format alternative to the main
Dolby Atmos mix.
About this task
Production renderers allow you to create an audio mix with 2.0 and 5.1 formats, that is
alternative to the main immersive audio mix. This alternative 2.0 and 5.1 content is sent
through a console to a legacy encoder or embeder (through the MADI output on channel 11-16
for 5.1 and 17-18 for 2.0).
Procedure
1. To select a presentation with the desired 2.0 and 5.1 setup, from the Settings menu,
select Production Renderers.
The Production Renderers window appears.
2. From the Production presentation drop-down list, select the desired presentation.
Results
The 2.0 and 5.1 setup from the selected presentation will be used as a legacy setup.
4.7 GPIO configuration
The general purpose input and output (GPIO) option allows you to control some DP590
functions on a connected console.
General purpose input and output connects with a console through a JNIOR Ethernet
controller (the JNIOR Ethernet controller is a third party product and is not included with
DP590). On the console, it allows you to select a particular presentation, or to select a
configuration to monitor. There are eight input connections on the DP590 available to assign
a particular function.
After each operation, the DP590 sends a confirmation to the console.
4.7.1 Configuring GPIO
You can configure the general purpose input and output (GPIO) connection to a console to
control some of the DP590 functions.
Procedure
1. From the Settings menu, select GPIO Config.
The GPIO Configuration window opens.
2. To connect with a GPIO device, enter the IP address and port number in the appropriate
fields.
3. To assing a function to pins 1 through 8, select it from the drop-down lists.
4. Click Connect.
Connection Status changes to Connected .
5. Click OK.
Dolby DP590 object authoring tool quick-start guide
24 June 2016
4.6 Setting production renderers
15