Dolby Laboratories CP750 Installationshandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Installationshandbuch für Computer Hardware Dolby Laboratories CP750 herunter. Dolby Laboratories CP750 19 Seiten. 7.1 audio for the dolby multichannel amplifier
Seite drucken
- 1. Introduction to Dolby Cp750 7.1 Audio for the Dolby Multichannel Amplifier
- 2. About the Cp750 (or Other Cinema Processor) Configuration for the
- 3. Connecting a Cp750 (or Other Sound Processor) to a Media Block
- 4. Configuring Advanced Connections
- 5. Cp750 Audio Output Cable Pinouts
- 6. To 25-Pin D-Connector Digital Audio Pinouts
If not already done, we recommend that you change the IP address, Netmask, and Gateway
settings to work with your IP schema by clicking in the respective fields, making the required
entries, and clicking Apply. If you are using the Dolby default IP scheme, we recommend that
you change the third octet of the default IP address to match your auditorium number and
the fourth octet to 143. This will be 192.168. x.143, where x = auditorium number.
6. Under the Network tab, click Dolby Atmos Connect and uncheck the Manual Mode box,
enter any static IP address (this value is not used in the configuration), and enter 0 for the
PTP domain number. This PTP setting allows the amplifier to search for a Yamaha device
(autodetect).
7. In the Input Stream 1 drop-down menu, select the Yamaha Tio1608-D, then click Apply.
Dolby CP750 7.1 audio for the Dolby Multichannel Amplifier Installation Manual
7 May 2018 Issue 1
Setting up the system
14