Dolby Laboratories CP750 Installationshandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Installationshandbuch für Computer Hardware Dolby Laboratories CP750 herunter. Dolby Laboratories CP750 19 Seiten. 7.1 audio for the dolby multichannel amplifier
Seite drucken
- 1. Introduction to Dolby Cp750 7.1 Audio for the Dolby Multichannel Amplifier
- 2. About the Cp750 (or Other Cinema Processor) Configuration for the
- 3. Connecting a Cp750 (or Other Sound Processor) to a Media Block
- 4. Configuring Advanced Connections
- 5. Cp750 Audio Output Cable Pinouts
- 6. To 25-Pin D-Connector Digital Audio Pinouts
6. After rebooting, reconnect with the Yamaha device, then click the Transmit tab in the Device
View window, and click the Create a New Multicast Flow button.
7. In the Create Multicast Flow pop-up screen, click (to check) in the AES67 Flow box, then
select the first eight channels, and click the Create button.
A multicast flow is now listed in the Transmit Flows pane of the Transmit window. This
specifies that audio received on analog channel 1 from the cinema sound processor is routed
out of digital channel 1 of the Yamaha device, channel 2 is routed out of digital channel 2, and
so on. You have now completed the AES67 setup in the Dante Controller software.
8. Connect the Yamaha Tio1608-D Primary Ethernet port directly to the amplifier DOLBY
ATMOS CONNECT IN port.
Dolby CP750 7.1 audio for the Dolby Multichannel Amplifier Installation Manual
7 May 2018 Issue 1
Setting up the system
12