CYP CPRO-8ER Betriebshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Kabel und Anschlüsse CYP CPRO-8ER herunter. CYP CPRO-8ER 12 Seiten. 4kx2k 1 by 8 hdmi splitter
Auch für CYP CPRO-8ER: Betriebshandbuch (12 seiten)
Seite drucken6.2 Rear Panel
HDMI IN
SYS
RESET
EDID
SERVICE
ON
OFF
STD
TV
1 2
3
4
1
SYS RESET ON/OFF:
This switch allows the user to perform a system reset. The default
setting is OFF, leave as it is when in normal use. By switching
ON, the unit will perform a reset every 8~10 minutes, in order to
perfrom this function the displays must have CEC supported.
When performed successfully, the system will automatically switch
the displays to HDMI input 1. They system reset will not perform on
those displays that do not have a CEC function.
2
EDID STD/TV:
The default factory setting is on TV, leave as it is when the display
is properly. The unit will detect the 1st HDMI output's EDID when
it obtain a 4Kx2K EDID and send out the signal accordingly to all
other output ports. If the1st HDMI output is without a 4Kx2K's EDID
the unit will detect all output's EDID and send out the signal that all
output can accept.
This device obtain the last memory function therefore, the device
will use the last output port 1's EDID when output port 1 is not
connected to a display after every power cycling or switch in
between the EDID setting.
Switch to STD to use build-in EDID if the display has problem. STD
EDID's video at 1080p@60Hz and audio at LPCM 2CH.
3
SERVICE:
This slot is reserved for factory service only.
4
HDMI IN:
Connect with source equipment such as DVD/Blu-ray or PS3
player.
5
HDMI OUT:
Connect to HDMI display for instant image display or cascade with
another family type transmitter.
3
1
2
3
4
HDMI OUT
5
6
7
5
8
DC 5V
6