CYP CPRO-8ER 운영 매뉴얼 - 페이지 8

{카테고리_이름} CYP CPRO-8ER에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CYP CPRO-8ER 12 페이지. 4kx2k 1 by 8 hdmi splitter
CYP CPRO-8ER에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지)

페이지 인쇄

6.2 Rear Panel

HDMI IN

SYS

RESET

EDID

SERVICE

OFF

STD

1 2

SYS RESET ON/OFF:

This switch allows the user to perform a system reset. The default

setting is OFF, leave as it is when in normal use. By switching

ON, the unit will perform a reset every 8~10 minutes, in order to

perfrom this function the displays must have CEC supported.

When performed successfully, the system will automatically switch

the displays to HDMI input 1. They system reset will not perform on

those displays that do not have a CEC function.

EDID STD/TV:

The default factory setting is on TV, leave as it is when the display

is properly. The unit will detect the 1st HDMI output's EDID when

it obtain a 4Kx2K EDID and send out the signal accordingly to all

other output ports. If the1st HDMI output is without a 4Kx2K's EDID

the unit will detect all output's EDID and send out the signal that all

output can accept.

This device obtain the last memory function therefore, the device

will use the last output port 1's EDID when output port 1 is not

connected to a display after every power cycling or switch in

between the EDID setting.

Switch to STD to use build-in EDID if the display has problem. STD

EDID's video at 1080p@60Hz and audio at LPCM 2CH.

SERVICE:

This slot is reserved for factory service only.

HDMI IN:

Connect with source equipment such as DVD/Blu-ray or PS3

player.

HDMI OUT:

Connect to HDMI display for instant image display or cascade with

another family type transmitter.

HDMI OUT

DC 5V