Ashly MX-406 Betriebshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Musik Mixer Ashly MX-406 herunter. Ashly MX-406 16 Seiten. Stereo microphone/line mixer
Auch für Ashly MX-406: Betriebshandbuch (12 seiten), Technische Hinweise & Spezifikationen (2 seiten), Betriebshandbuch (12 seiten), Betriebshandbuch (12 seiten)

Ashly MX-406 Betriebshandbuch
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated "dangerous volt age"
within the product's enclosure that may be
of sufficient magnitude to constitute a risk
of electric shock to persons.
THIS APPARATUS MUST BE EARTHED

1. INTRODUCTION

Congratulations on your purchase of an Ashly
MX-406 stereo mic/line mixer, a professional, studio qual-
ity solution to everday mixing needs. MX-406 features
include six channels of mic or line inputs with mic input
pad, TRS insert points, and +48V phantom power. Each
channel has up to 60dB input gain, separate treble and
bass controls, an aux send control, level, and a stereo pan
control. An aux input is provided for a stereo program
source such as tape or CD. Outputs include aux master,
stereo line out (pre-master), stereo left and right, trans-
former balanced mono out, and stereo headphones. A
full 11 segment LED array indicates stereo output level.
Stereo main outputs use 1/4" jacks, stereo aux
input and line out use RCA connectors, and a transformer
isolated 600 ohm mono output uses an XLR connector.
Ashly mixers still use professional quality 16mm metal
shaft potentiometers for greater accuracy and long life
and of course, Ashly products come with a worry-free five
year warranty.

2. UNPACKING

As a part of our system of quality control, every
Ashly product is carefully inspected before leaving the
factory to ensure flawless appearance. After unpacking,
please inspect for any physical damage. Save the ship-
ping carton and all packing materials , as they were care-
fully designed to reduce to minimum the possibility of
Operating Manual - MX-406 Stereo Microphone/Line Mixer
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RE-
MOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,
DO NOT EXPOSE THIS APPlIANCE TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE, REPLACE ONLY WITH
SAME TYPE FUSE. REFER REPLACEMENT TO QUALIFIED
SERVICE PERSONNEL.
WARNING:
The exclamation point within an eqilateral
triangle is intended to alert the user to the
presence of import ant operating and
maintenance instructions in the literature
accompanying the device.
transportation damage should the unit again require pack-
ing and shipping. In the event that damage has occurred,
immediately notify your dealer so that a written claim to
cover the damages can be initiated.
The right to any claim against a public carrier
can be forfeited if the carrier is not notified promptly and
if the shipping carton and packing materials are not avail-
able for inspection by the carrier. Save all packing mate-
rials until the claim has been settled.

3. AC POWER REQUIREMENTS

The MX-406 mixer will perform normally from
93 to 125 volts AC, 50-60Hz (some export models are
wired for 240 Volts and are labeled accordingly). Use
only properly grounded AC receptacles. To reduce the
risk of ground loop hum, use a central point for system
AC power distribution. In the event of fuse failure, refer
this unit to a qualified service technician for fuse replace-
ment using only the same type fuse. Power consumption
is less than 20 watts.
3