Dolomite Mitos Schnellstart-Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Laborausrüstung Dolomite Mitos herunter. Dolomite Mitos 3 Seiten. Automated product collector
Auch für Dolomite Mitos: Programmieranleitung Handbuch (15 seiten)
Seite drucken
6
Enter the Rack Code into the Collector
via the touchpad and screen (Figure
6). Press the "Rack" key, enter the
rack number (e.g., Code 24) and press
"Ok". The rack code on the unit will
determine the available vial locations
when running the software.
Figure 7: Automated Product Collector Controlled via FCC
dolomite-microfluidics.com
Dolomite Microfluidics is a brand of Blacktrace
Registered office: The Dolomite Centre Ltd. 1 Anglian Business Park, Royston, SG8 5TW, UK
Reg in England No. 04257809
SHPT-487168127-420_v.1.0
7
• Connect the Serial (RS232) Cable
to USB from the unit to the PC.
• Open the Flow Control Center
Software (Figure 7).
• Configure the location of the X-Y
arm over a specific vial and
control the valve state to either
"Collect" into the vial, or "Drain"
into a waste container.
Figure 6: Collector Interface