Dolomite Mitos 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Dolomite Mitos에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolomite Mitos 3 페이지. Automated product collector
Dolomite Mitos에 대해서도 마찬가지입니다: 프로그래밍 지침 매뉴얼 (15 페이지)

페이지 인쇄
Dolomite Mitos 빠른 시작 매뉴얼
6
Enter the Rack Code into the Collector
via the touchpad and screen (Figure
6). Press the "Rack" key, enter the
rack number (e.g., Code 24) and press
"Ok". The rack code on the unit will
determine the available vial locations
when running the software.
Figure 7: Automated Product Collector Controlled via FCC
dolomite-microfluidics.com
Dolomite Microfluidics is a brand of Blacktrace
Registered office: The Dolomite Centre Ltd. 1 Anglian Business Park, Royston, SG8 5TW, UK
Reg in England No. 04257809
SHPT-487168127-420_v.1.0
7
• Connect the Serial (RS232) Cable
to USB from the unit to the PC.
• Open the Flow Control Center
Software (Figure 7).
• Configure the location of the X-Y
arm over a specific vial and
control the valve state to either
"Collect" into the vial, or "Drain"
into a waste container.
Figure 6: Collector Interface