Cypress Semiconductor CY7B9920 Spezifikationsblatt

Blättern Sie online oder laden Sie pdf Spezifikationsblatt für Computer Hardware Cypress Semiconductor CY7B9920 herunter. Cypress Semiconductor CY7B9920 12 Seiten. Cypress low skew clock buffer specification sheet

Seite drucken

Features

■

All outputs skew <100 ps typical (250 max.)

■

15 to 80 MHz output operation

■

Zero input to output delay

■

50% duty cycle outputs

■

Outputs drive 50Ω terminated lines

■

Low operating current

■

24-pin SOIC package

■

Jitter:<200 ps peak to peak, <25 ps RMS

Functional Description

The CY7B9910 and CY7B9920 Low Skew Clock Buffers offer

low skew system clock distribution. These multiple output clock

drivers optimize the timing of high performance computer

systems. Each of the eight individual drivers can drive terminated

transmission lines with impedances as low as 50Ω. They deliver

minimal and specified output skews and full swing logic levels

(CY7B9910 TTL or CY7B9920 CMOS).

Logic Block Diagram

Cypress Semiconductor Corporation

Document Number: 38-07135 Rev. *B

TEST

PHASE

FREQ

FILTER

DET

REF

•

198 Champion Court

Low Skew Clock Buffer

The completely integrated PLL enables "zero delay" capability.

External divide capability, combined with the internal PLL, allows

distribution of a low frequency clock that is multiplied by virtually

any factor at the clock destination. This facility minimizes clock

distribution difficulty while allowing maximum system clock

speed and flexibility.

Block Diagram Description

Phase Frequency Detector and Filter

The Phase Frequency Detector and Filter blocks accept inputs

from the reference frequency (REF) input and the feedback (FB)

input and generate correction information to control the

frequency of the Voltage Controlled Oscillator (VCO). These

blocks, along with the VCO, form a Phase Locked Loop (PLL)

that tracks the incoming REF signal.

VCO

The VCO accepts analog control inputs from the PLL filter block

and generates a frequency. The operational range of the VCO is

determined by the FS control pin.

VOLTAGE

CONTROLLED

OSCILLATOR

•

San Jose

CA 95134-1709

CY7B9910

CY7B9920

•

408-943-2600

Revised August 07, 2007

[+] Feedback