Cytron Maker Uno Plus Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kontrolleinheit Cytron Maker Uno Plus herunter. Cytron Maker Uno Plus 16 Seiten.
Seite drucken
4. BOARD LAYOUT
LABEL
ON BOARD PIEZO BUZZER
A
Piezo buzzer is connected to pin 8 through slide switch (labeled B).
PIEZO BUZZER SLIDE SWITCH
Slide switch to connect between pin 8 to piezo buzzer (labeled A). To use piezo buzzer,
B
slide the switch on and program the buzzer. To use pin 8 for other purpose, slide the
switch off.
VOLTAGE REGULATOR 3.3V
C
Voltage regulator 3.3V used to regulate 5V USB to 3.3V and connected to pin 3.3V
(labeled I).
LED INDICATOR FOR USB-SERIAL
D
Indicates USB-Serial data for uploading process or debug purpose (Serial Monitor).
USB MICRO B CONNECTOR
E
Main supply for Maker Uno. Used for program and debug purpose (Serial Monitor) too.
USB-SERIAL IC CONVERTER (FT231X)
F
Converts USB data to serial data. Used for program and debug purpose (Serial Monitor).
RESET BUTTON
G
Button to restart Maker UNO program.
PROGRAMMABLE BUTTON
H
This button is connected to pin 2 and GND. To use it, user need to configure it as
INPUT_PULLUP.
ARDUINO UNO R3 STANDARD FEMALE PIN HEADER
I
Maker UNO female header pin follows Arduino UNO R3 standard. The only difference is,
Created by C ytron Technologies Sdn Bhd – All Rights Reserved
Product User's Manual -
FUNCTION
ROBOT.HEAD to TOE
M AKER-UNO-PLUS
Back to
I NDEX
7