Bluerock Tools 808 series Service-Handbuch - Seite 10
Blättern Sie online oder laden Sie pdf Service-Handbuch für Werkzeuge Bluerock Tools 808 series herunter. Bluerock Tools 808 series 10 Seiten. Wire strippers
Seite drucken21. Use a 14mm wrench to loosen the locknuts and blade alignment bolts on each side of the
machine as shown. Note: This is only necessary if the blades and cutting channels are
misaligned.
22. Move the top roller so the blades are centered in the cutting channels.
23. Tighten each of the alignment bolts only until they touch the roller housings.
24. Back each bolt out a half turn to allow room for movement and then tighten each locknut.
Blade Alignment Adjustment