Bluerock Tools 808 series Manuel d'entretien - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Bluerock Tools 808 series. Bluerock Tools 808 series 10 pages. Wire strippers
Imprimer la page21. Use a 14mm wrench to loosen the locknuts and blade alignment bolts on each side of the
machine as shown. Note: This is only necessary if the blades and cutting channels are
misaligned.
22. Move the top roller so the blades are centered in the cutting channels.
23. Tighten each of the alignment bolts only until they touch the roller housings.
24. Back each bolt out a half turn to allow room for movement and then tighten each locknut.
Blade Alignment Adjustment