eGauge EG4 Series Schnellstart-Handbuch - Seite 10
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Messgeräte eGauge EG4 Series herunter. eGauge EG4 Series 12 Seiten.
Seite druckenSoftware Configuration
After powering the meter on and connecting it
to the network, the meter can be accessed via
local IP shown on the LCD screen or by visiting
eGauge.net/find
access. Allow up to 5 minutes for the meter to
connect to the Internet.
•
The username and password for the meter
is found on a label on the back-side of
the meter. This is required to configure the
meter.
•
After accessing the meter, navigate
to Settings → Installation. Use the CT
information table made earlier to input the
CT information and Power Registers.
•
Visit
eGauge.net/start
information on configuring the eGauge
meter.
if the meter has Internet
for more
10