Blueshape Energy inside PWS-RUGGED Betriebsanleitung - Seite 10
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Tragbarer Generator Blueshape Energy inside PWS-RUGGED herunter. Blueshape Energy inside PWS-RUGGED 16 Seiten. Power station for v-lock and 3-stud lithium ion batteries only
Seite drucken
When 3rd party batteries are in use, the capacity value may not be
as accurate since this is an estimation that unit makes based on the
battery voltage
The second screen will display as follows:
Column #1
Column #2
Column #3
Column #4
Notes:
1. If an on-board battery is:
< 10% state-of-charge (for battery types that are communicative)
or
Its voltage is less than 13 Volts (for batteries that do not
communicate
then,
10
column 2 flashes in the appropriate row of the battery in caption
2. If a battery on any station is missing (not installed), the
appropriate row will show blanks.
The above is applicable for both screen 1 and screen 2.
Battery no. (1 through 4)
An asterisk is shown when batteries are not
communicating with the unit
Battery Voltage
Current demand per battery
Actual power mode selected, 28V/48V and
power outputs for 24V/48V and 14V supplies
simultaneously