Blueshape Energy inside PWS-RUGGED 사용 설명서 - 페이지 10
{카테고리_이름} Blueshape Energy inside PWS-RUGGED에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Blueshape Energy inside PWS-RUGGED 16 페이지. Power station for v-lock and 3-stud lithium ion batteries only
페이지 인쇄
When 3rd party batteries are in use, the capacity value may not be
as accurate since this is an estimation that unit makes based on the
battery voltage
The second screen will display as follows:
Column #1
Column #2
Column #3
Column #4
Notes:
1. If an on-board battery is:
< 10% state-of-charge (for battery types that are communicative)
or
Its voltage is less than 13 Volts (for batteries that do not
communicate
then,
10
column 2 flashes in the appropriate row of the battery in caption
2. If a battery on any station is missing (not installed), the
appropriate row will show blanks.
The above is applicable for both screen 1 and screen 2.
Battery no. (1 through 4)
An asterisk is shown when batteries are not
communicating with the unit
Battery Voltage
Current demand per battery
Actual power mode selected, 28V/48V and
power outputs for 24V/48V and 14V supplies
simultaneously