AmbiCom WP-SA Handbuch zur Schnellinstallation - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Adapter AmbiCom WP-SA herunter. AmbiCom WP-SA 12 Seiten. Wireless printer adapter

Seite drucken

INSTALLATION CONSIDERATIONS

Important considerations must be followed for the successful installation of additional

Slave PC Adapters to an existing Wireless Printer Network installation:

The installation of a new Slave PC Adapter can only be made with one Master Printer

Adapter at a time.

Successful searching and pairing cannot be accomplished if a Master Printer Adapter, other

than the one being used during the installation procedures above, is unplugged from its

printer's USB port and left powered-on.

PRINTING CONSIDERATIONS

In a Wireless Printer Network, idle Slave PC Adapters will blink periodically

When installing additional Slave PC Adapters, the LED lights will turn green for a few

seconds and then will turn off after a brief timeout period.

Printing is performed through a polling process in which the Master Printer Adapter surveys

all paired Slave PC Adapters for print requests. The polling sequence begins with the first

paired Slave PC Adapter (supplied in the Wireless Printer Kit). The rest of the print requests

will be processed in the order the Slave PC Adapter was paired with the Master Printer

Adapter.

Only one adapter can be actively printing at a time. After the current print queue is

completed, the Slave PC Adapter's connection will be released after a timeout period. Then

other active Slave PC Adapters will be polled in sequence to see if print requests are pending.

If the Slave PC Adapter is not connected to the Master Printer Adapter, the printer status may

appear to be either Offline or Not Responding, depending on your operating system and

printer software. At this time, when a print job is submitted, it will be entered in the offline

printer queue and processed when the printer comes online. However, depending on the

operating system and the printer software, an error message may appear (see example below)

and either 1) disappear when the printer comes online and process the job or 2) require the

print job to be resubmitted.

WP-SA Quick Installation Guide v.1.0

Page 5