Ambient Technologies RCSTE Installations- und Betriebsanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Installations- und Betriebsanleitung für Fernsteuerung Ambient Technologies RCSTE herunter. Ambient Technologies RCSTE 7 Seiten. Thermostatic on/off remote control – 120vac
Seite drucken•
This remote control system requires three (3) "AAA" batteries to power the transmitter and 120VAC to
power the receiver. Wiring must conform to appliance requirement and building codes/ordinances as
required by local and national code authorities having jurisdiction.
•
Do not short (or jumper) across the gas valve terminals to test the remote control installation. This could
damage the unit and void the warranty.
•
This remote control system should only be used as described in this manual. Any other use is not
recommended and will void the warranty.
Due to the sensitive temperature monitoring components in the transmitter, it is necessary to
allow the transmitter to stabilize to room temperature before accurate room temperatures are
displayed. If the transmitter is activated from a severe cold condition, allow 15 minutes for
accurate temperature readings to appear on the LCD.
Turn appliance OFF and allow to cool before installing or servicing. DO NOT connect
110-120 VAC wiring to the milli-volt gas control valve. The remote operator must be installed
exactly as outlined in these instructions. Read all instructions completely before attempting
installation. Follow instructions carefully during installation. Any modification of
components will void the warranty and may cause a fire hazard.
f i r e - p a r t s . c o m
Turn appliance OFF (at the appliance or remote receiver) if you are away from your house
for a long period of time.
Remote Receiver
The remote receiver may be wall mounted or installed in the
appliance per the appliance homeowner's manual. Refer to the
Homeowner's Manual for special installation instructions. If
wall mounted, the remote receiver must be installed in a junction
box with cover plate provided. Failure to follow the installation
instructions found in the appropriate Homeowner's Manual will
void the warranty and may cause a fire hazard.
Power up Receiver
The receiver is powered by plugging into a polarized 120VAC
outlet.
50D0104 RCSTE Rel 0 Feb 10 2006
INSTALLATIONS
Page 2 of 7
120VAC Plug for Receiver
Receiver
Ambient Technologies
A Division Of Monessen Hearth Systems
mV Valve