Ambient Weather WS-14 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Thermometer Ambient Weather WS-14 herunter. Ambient Weather WS-14 17 Seiten. Wireless 8-channel floating pool and spa thermometer with daily min/max display

Seite drucken

5.2 Console Operation

Note: The console has three buttons for easy operation: SET button, MIN/MAX button, and

CH/+ button.

5.2.1 Set Mode

The Set Mode allows you to set the time and time format, time alarm and units of measure.

To enter the set mode, press and hold the SET key for 3 seconds.

1. 12 hr/24 hr time format. Press the [+] key to switch between 12 and 24 hour format. Press

the SET key to advance to the next setting.

2. Hour. Press the [+] or [-] key to increase or decrease the hour. Press the SET key to

advance to the next setting.

3. Minute. Press the [+] or [-] key to increase or decrease the minute. Press the SET key to

advance to the next setting.

4. Alarm Hour. Press the [+] or [-] key to increase or decrease the alarm hour. While the alarm

value is flashing, press and hold the SET button for three seconds to toggle the alarm on and

the alarm off. The time alarm icon will appear

Press (do not hold) the SET key to advance to the next setting.

5. Alarm Minute. Press the [+] or [-] key to increase or decrease the alarm minute. While the

alarm value is flashing, press and hold the SET button for three seconds to toggle the alarm

on and the alarm off. The time alarm icon will appear

disabled. Press(do not hold) the SET key to advance to the next setting.

6. Temperature Units of Measure. Press the [+] key to switch between °F and °C units of

measure. Press the SET key to advance to the next setting.

7. Max/Min Clearing. The Max/Min can be programmed to clear daily (at midnight) or

manually. Press the [+] key to switch between "Clears Daily" and Clears Manually. Press the

SET key to exit setting.

5.2.2 Viewing the High and Low Alarms

The high and low alarms can be set for Channels 1 and 2 only. Press the CH/+ button to switch the

display between Channel 1 and 2.

Next, press the SET button to view the High (MAX) and LOW (MIN) alarm along with the alarm

time. Press the SET button again to return to the normal mode.

5.2.3 Alarm Defaults

Channel Default Condition HI ALARM (temperature) ºF

OFF

5.2.4 Setting the Min and Max Alarm

The high and low alarms can be set for Channels 1 and 2 only. Press the CH/+ button to switch the

display between Channel 1 and 2.

Next, press the SET button once, and the alarm icon will appear:

button for 3 seconds, and the temperature HIGH (max) alarm will flash. Press the CH/+ button to

increase the HIGH alarm and the MIN/MAX button to decrease the HIGH alarm. Press and hold the

+ or - button to change rapidly. While the alarm value is flashing, press and hold the SET button for

Version 1.1

100

110

when set, and disappear when disabled.

when set, and disappear when

LOW ALARM (temperature)ºF

. Press and hold the SET

Page 11