Ambient Weather WS-14 Kullanıcı Kılavuzu - Sayfa 11
Termometre Ambient Weather WS-14 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambient Weather WS-14 17 sayfaları. Wireless 8-channel floating pool and spa thermometer with daily min/max display
Sayfayı Yazdır
5.2 Console Operation
Note: The console has three buttons for easy operation: SET button, MIN/MAX button, and
CH/+ button.
5.2.1 Set Mode
The Set Mode allows you to set the time and time format, time alarm and units of measure.
To enter the set mode, press and hold the SET key for 3 seconds.
1. 12 hr/24 hr time format. Press the [+] key to switch between 12 and 24 hour format. Press
the SET key to advance to the next setting.
2. Hour. Press the [+] or [-] key to increase or decrease the hour. Press the SET key to
advance to the next setting.
3. Minute. Press the [+] or [-] key to increase or decrease the minute. Press the SET key to
advance to the next setting.
4. Alarm Hour. Press the [+] or [-] key to increase or decrease the alarm hour. While the alarm
value is flashing, press and hold the SET button for three seconds to toggle the alarm on and
the alarm off. The time alarm icon will appear
Press (do not hold) the SET key to advance to the next setting.
5. Alarm Minute. Press the [+] or [-] key to increase or decrease the alarm minute. While the
alarm value is flashing, press and hold the SET button for three seconds to toggle the alarm
on and the alarm off. The time alarm icon will appear
disabled. Press(do not hold) the SET key to advance to the next setting.
6. Temperature Units of Measure. Press the [+] key to switch between °F and °C units of
measure. Press the SET key to advance to the next setting.
7. Max/Min Clearing. The Max/Min can be programmed to clear daily (at midnight) or
manually. Press the [+] key to switch between "Clears Daily" and Clears Manually. Press the
SET key to exit setting.
5.2.2 Viewing the High and Low Alarms
The high and low alarms can be set for Channels 1 and 2 only. Press the CH/+ button to switch the
display between Channel 1 and 2.
Next, press the SET button to view the High (MAX) and LOW (MIN) alarm along with the alarm
time. Press the SET button again to return to the normal mode.
5.2.3 Alarm Defaults
Channel Default Condition HI ALARM (temperature) ºF
1
OFF
2
OFF
5.2.4 Setting the Min and Max Alarm
The high and low alarms can be set for Channels 1 and 2 only. Press the CH/+ button to switch the
display between Channel 1 and 2.
Next, press the SET button once, and the alarm icon will appear:
button for 3 seconds, and the temperature HIGH (max) alarm will flash. Press the CH/+ button to
increase the HIGH alarm and the MIN/MAX button to decrease the HIGH alarm. Press and hold the
+ or - button to change rapidly. While the alarm value is flashing, press and hold the SET button for
Version 1.1
©Copyright 2014, Ambient LLC. All Rights Reserved.
100
110
when set, and disappear when disabled.
when set, and disappear when
LOW ALARM (temperature)ºF
60
90
. Press and hold the SET
Page 11