Ambient Weather WS-14 Kullanıcı Kılavuzu - Sayfa 15
Termometre Ambient Weather WS-14 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ambient Weather WS-14 17 sayfaları. Wireless 8-channel floating pool and spa thermometer with daily min/max display
8 Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1. Email Support:
2. Live Chat Support:
3. Technical Support: 480-283-1644 (M-F 8am to 4pm Arizona Time)
Problem
Wireless remote (thermo-hygrometer) not
reporting in to console.
There are dashes (--.-) on the display
console.
Indoor and Floating pool temperature do
not agree
Display console contrast is weak
Version 1.1
©Copyright 2014, Ambient LLC. All Rights Reserved.
www.ambientweather.com/chat.html
Solution
If any of the sensor communication is lost, dashes (--.-)
will be displayed on the screen. To reacquire the signal,
press and hold the CHANNEL/+ button for 3 seconds,
and the remote search icon
displayed. Once the signal is reacquired, the remote
search icon
will be displayed.
The maximum line of sight communication range is 300'
and 100' under most conditions. Move the sensor
assembly closer to the display console.
If the sensor assembly is too close (less than 5'), move
the sensor assembly away from the display console.
Make sure the remote sensor LCD display is working
and the transmitter light is flashing once per 60 seconds.
Install a fresh set of batteries in the remote
thermo-hygrometer. For cold weather environments,
install lithium batteries.
Make sure the remote sensors are not transmitting
through solid metal (acts as an RF shield), or earth
barrier (down a hill).
Move the display console around electrical noise
generating devices, such as computers, TVs and other
wireless transmitters or receivers.
Move the remote sensor to a higher location. Move the
remote sensor to a closer location.
Allow up to one hour for the sensors to stabilize due to
signal filtering. The indoor and floating pool temperature
sensors should agree within 2 °F (the sensor accuracy is
± 1 °F).
Use the calibration feature to match the indoor and
floating pool temperature to a known source.
Replace console batteries with a fresh set of batteries.
(M-F 8am to 4pm Arizona Time)
will be constantly
will turn off, and the current values
Page 15