Coalesse SW 1 Manual - Página 10

Navegue en línea o descargue pdf Manual para Mobiliario interior Coalesse SW 1. Coalesse SW 1 11 páginas. Replacement of knit and fabric components
También para Coalesse SW 1: Instrucciones de servicio al cliente (7 páginas)

Imprimir página
Coalesse SW 1 Manual
GLASS TOP INSTALLATION
1.
Follow previous installation steps
for substructure.
2.
a) Clean bottom of glass with
alcohol and a clean rag.
b) Clean top surface of substructure
with a rag before applying pads.
3.
Peal off paper backing on the back
of rubber pads.
4.
Apply pads onto the substructure
at the locations shown.
5.
Carefully place glass onto rubber
pads, leaving a 2 -1/2" overhang
around the table perimeter.
NOTE: Make certain that glass
halves are tight together at seam.
5
2- 1/2"
OVERHANG
3
Peel off paper, then place
pads as shown below.
4
SUBSTRUCTURE
Page 10 of 11
939500440 Rev E