Coalesse SW 1 Manuel - Sayfa 10
İç Mekan Mobilyaları Coalesse SW 1 için çevrimiçi göz atın veya pdf Manuel indirin. Coalesse SW 1 11 sayfaları. Replacement of knit and fabric components
Ayrıca Coalesse SW 1 için: Müşteri Hizmetleri Talimatları (7 sayfalar)
Sayfayı Yazdır
GLASS TOP INSTALLATION
1.
Follow previous installation steps
for substructure.
2.
a) Clean bottom of glass with
alcohol and a clean rag.
b) Clean top surface of substructure
with a rag before applying pads.
3.
Peal off paper backing on the back
of rubber pads.
4.
Apply pads onto the substructure
at the locations shown.
5.
Carefully place glass onto rubber
pads, leaving a 2 -1/2" overhang
around the table perimeter.
NOTE: Make certain that glass
halves are tight together at seam.
5
2- 1/2"
OVERHANG
3
Peel off paper, then place
pads as shown below.
4
SUBSTRUCTURE
Page 10 of 11
939500440 Rev E