Aktek AT300 Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para Instrumentos de medida Aktek AT300. Aktek AT300 16 páginas. Ultrasonic thickness gauge
Imprimir página4.7 Changing Units
On the measurement mode, press the
imperial and metric units.
4.8 Memory Management
4.8.1 Storing a reading
There are twenty files (F00-F19) that can be used to store the measurement values
inside the gauge. At most 100 records (thickness values) can be stored to each file. By
simply pressing the
thickness value will be saved to current file. It is added as the last record of the file. To
change the destination file to store the measured values, follow the steps:
1) Press the
key to activate the data logging functions. It will display the current file
name and the total record count of the file.
2) Use the
key and the
3) Press the
key to exit the data logging functions at any time.
4.8.2 Clearing selected file
The user may require the contents of an entire file be completely cleared of all
measurements. This would allow the user to start a new list of measurements starting at
storage location L00. The procedure is outlined in the following steps.
1.
Press the
key to activate the data logging fuctions. It will display the current file
name and the total record count of the file.
2.
Use the
key and the
measurements.
3.
Press the
key on the desired file. It will automatically clear the file, and display
"-DEL".
4.
Press the
key, at any time, to exit the data logging functions and return to
measurement mode.
4.8.3 Viewing/deleting stored record
This function provides the user with the ability to view/delete a record in a desired file
previously saved in memory. Following is the steps:
1.
Press the
key to activate the data logging functions. It will display the current file
name and the total record count of the file.
2.
Use the
key and the
3.
Press the
key to enter the selected file. It will display the current record number (for
example, L012) and the record content.
4.
Use the
key and the
5.
Press the
key on the desired record. It will automatically delete this record, and
display "-DEL".
6.
Press the
key to exit the data logging functions and return to measurement mode.
key after a new measurement reading appears, the measured
key to select the desired file to set as current file.
key to scroll to the file that will be cleared of all
key to select the desired file.
key to select the desired record.
key to switch back and forth between
www.aktek.com.tr
12