Aktek AT300 사용자 설명서 - 페이지 12

{카테고리_이름} Aktek AT300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aktek AT300 16 페이지. Ultrasonic thickness gauge

페이지 인쇄

4.7 Changing Units

On the measurement mode, press the

imperial and metric units.

4.8 Memory Management

4.8.1 Storing a reading

There are twenty files (F00-F19) that can be used to store the measurement values

inside the gauge. At most 100 records (thickness values) can be stored to each file. By

simply pressing the

thickness value will be saved to current file. It is added as the last record of the file. To

change the destination file to store the measured values, follow the steps:

1) Press the

key to activate the data logging functions. It will display the current file

name and the total record count of the file.

2) Use the

key and the

3) Press the

key to exit the data logging functions at any time.

4.8.2 Clearing selected file

The user may require the contents of an entire file be completely cleared of all

measurements. This would allow the user to start a new list of measurements starting at

storage location L00. The procedure is outlined in the following steps.

Press the

key to activate the data logging fuctions. It will display the current file

name and the total record count of the file.

Use the

key and the

measurements.

Press the

key on the desired file. It will automatically clear the file, and display

"-DEL".

Press the

key, at any time, to exit the data logging functions and return to

measurement mode.

4.8.3 Viewing/deleting stored record

This function provides the user with the ability to view/delete a record in a desired file

previously saved in memory. Following is the steps:

Press the

key to activate the data logging functions. It will display the current file

name and the total record count of the file.

Use the

key and the

Press the

key to enter the selected file. It will display the current record number (for

example, L012) and the record content.

Use the

key and the

Press the

key on the desired record. It will automatically delete this record, and

display "-DEL".

Press the

key to exit the data logging functions and return to measurement mode.

key after a new measurement reading appears, the measured

key to select the desired file to set as current file.

key to scroll to the file that will be cleared of all

key to select the desired file.

key to select the desired record.

key to switch back and forth between