d2itsu APD-12HR Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Aire acondicionado d2itsu APD-12HR. d2itsu APD-12HR 20 páginas.

Imprimir página

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel and remote controller

and all its functions, then follow the symbol for the functions you desire.

The unit can be controlled by the unit control panel alone or with the remote controller.

NOTE: This manual does not include Remote Controller Operations, see the <<Remote

Controller Instruction>> packed with the unit for details.

OPERATION PANEL OF THE AIR CONDITIONER

NOTE: On some models SLEEP button is instead of ECO button.

1. Power button

Power switch on/off.

2. SLEEP/ECO button

Used to initiate the SLEEP/ECO operation.

3. FAN/ION button (ION is optional)

Control the fan speed. Press to select the fan

speed in four steps-LOW, MED, HI and AUTO.

The fan speed indicator light illuminates under

different fan settings except AUTO speed. When

select AUTO fan speed, all the fan indicator lights

turn dark.

NOTE: Press this button for 3 seconds to initiate

ION feature.The ion generator is energized and will

help to remove pollen and impur ities from the air,

and trap them in the filter. Press it for 3 seconds

again to stop the ION feature.

4. UP (+) and DOWN (-) button

Used to adjust (increasing/decreasing)

temperatures ettings in 1ºC /2ºF( or 1ºF) inc rements

in a range of 17ºC/62 F to 30ºC/88 F (or 86ºF)

or the TIMER setting in a range of 0~24hrs.

UP(+) and DOWN(-) button

NOTE: The control is capable of displaying

temperature in degrees Fahrenheit or degrees

Celsius. To convert from one to the other, press

and hold the Up and Down buttons at the same

time, for 3 seconds.

AIR CONDITIONER FEATURES

5. MODE select button

Selects the appropriate operating mode.

Each time you press the button, a mode is selected

in a sequence that goes from AUTO, COOL, DRY,

FAN and HEAT(cooling only models without). The

mode indicator light illuminates under the different

mode settings.

6. TIMER button

AUTO OFF stop time program, in conjuction

with the + & - buttons. The timer on/off indicator light

illuminates under the timer on/off settings.

7. SWING button

(Applicable to the models with auto swing feature

only)

Used to initiate the Auto swing feature.

When the operation is ON, press the SWING button

can stop the louver at the desired angle.

8. LED Display

Shows the set temperature in "ºC" or

"ºF" ("ºF" no display) and the Auto-timer settings.

While on DRY and FAN modes, it shows the room

temperature.

Fig. 3