D3FY SPORTS VERT3X Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Accesorios D3FY SPORTS VERT3X. D3FY SPORTS VERT3X 16 páginas. .68 caliber paintball marker

IMPORTANT C02 & HPA AIR

TANK SAFETY GUIDELINES

•Only use Co2 or HPA Air Tanks that are made for the sport of paintball

•The Co2/HPA Air Tank can fly off with enough force to cause property

damage, serious injury or death if the Valve unscrews from the cylinder

head. LOOK at the Valve when removing the tank from the marker.

Be sure that the valve is turning with the tank rather than remaining

stationary with the marker's ASA.

STOP IMMEDIATELY if the valve starts to unscrew from the tank. Screw

the tank back onto the marker's bottom ASA adapter and contact a

qualified airsmith for further assistance.

•Tank valves must only be installed or removed by qualified personnel.

•All tanks must meet ASTM/CE/DOT/TC Specifications.

•See Co2 or HPA tank labels for retest dates. Tanks must be retested

periodically. Follow the warning labels listed on tanks.

•VERT3X Marker for use with refillable cylinders withstand input

pressure of 207bar (3,000psi) without catastrophic failure.

•Improper use, filling, storage, or disposal of all air tanks may result in

property damage, personal injury, and/or death.

•Always keep Air tanks out of reach from children or any inexperienced

person(s).

•Air tanks must only be filled by qualified and trained personnel.

•Never alter the Air tank in any way.

•DO NOT expose pressurized cylinders to temperatures in excess of

54˚C (130˚F).

•Any tank packaged with the product is intended for paintball use only.

•Tanks heated to a temperature of 121°C (250°F) or more must be re-

qualified or condemned.

•Do not expose tanks to corrosive materials and do not clean with

caustic cleaners.

•Co2/Compressed gas is dangerous, do not allow Co2/Compressed gas

to come in direct contact with your skin or try to stop a leak by covering

it with your hand.

•NEVER over pressurize a Co2 or HPA Air cylinder.

•A urethane O-ring is highly recommended before attaching any air

supply to the marker.

•Confirm that there is a urethane O-ring attached on the Co2/HPA

Air Tank Valve before attaching the tank to the marker. If the O-ring is

missing from the valve, the paintball marker will leak from the ASA as

soon as an air tank is secured to the marker.

•Always follow the warning listed on Co2/HPA tank.

IMPORTANT CO2 & HPA AIR TANK SAFETY GUIDELINES Ⅰ