D3FY SPORTS VERT3X Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Accesorios D3FY SPORTS VERT3X. D3FY SPORTS VERT3X 16 páginas. .68 caliber paintball marker

MAINTAINING YOUR VERT3X

PAINTBALL MARKER

PART # AND DESCRIPTION

(X-20-B/DB/T) RECEIVER

(I-04) DELRIN BOLT

(I-05) BOLT COCKING PIN

(I-08) STRIKER

(I-09) STRIKER SPRING - (I-10) STRIKER SPRING (HIGH VELOCITY)

(I-13) STRIKER BUFFER

(I-15) VELOCITY/SPRING GUIDE

(X-15) STRIKER PLUG

QUICK CLEAN AND DISASSEMBLE

Make sure all paintballs are removed from the marker and that the air

source is detached before attempting any maintenance and/or repairs.

1. Push the Safety button to the "SAFE" position. Cock back the bolt.

Note: This will help keep the Striker (I-08) from rotating and moving

forward.

2. Pull upward on the Bolt Cocking Pin (I-05) to disconnect from the

Striker. Remove the Delrin Bolt (I-04) by sliding it out the rear of the

Receiver/Body (X-20).

3. Wipe off any dirt,debris, or paint from the Delrin Bolt using a clean

cloth. Use a squeegee or swab to clean the inside of the Receiver.

4. Insert the Delrin Bolt with the open face in first. Align the Bolt

Cocking Pin with the Striker hole and push down on the Pin to lock it

in place.

Important: Make sure to install the Delrin Bolt with the air passage hole

located in the middle of the bolt facing downwards.

Note: If the Delrin Bolt is not installed correctly, the paintball marker will

not function properly.

7. With the Bolt Cocking Pin properly installed to the Striker, push the

Safety button to the "Fire" position. The Delrin Bolt will slide forward

when you pull the trigger.

DISASSEMBLE REAR INTERNALS

1. With the Bolt in the un-cocked position, pull upward on the Bolt

Cocking Pin to disconnect the Delrin Bolt from the Striker. Remove the

Delrin Bolt by sliding it out the rear of the Receiver.

2. Remove the Striker Plug (X-15) by unscrewing it counter-clockwise.

This will allow you to remove the Striker Spring (I-09), Striker Buffer (I-13)

MAINTAINING YOUR CONQU3ST PAINTBALL MARKER (CONTINUED) Ⅰ