Astonica 50105605 Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Mobiliario interior Astonica 50105605. Astonica 50105605 2 páginas. Samoa cushion cast curl design hi back dining chair

Imprimir página
PARTS & HARDWARE LIST
PART #
A
Chair Back
B
Seat
C
Left
Leg/Arm
D
Right
Leg/Arm
E
M8 Studs
F
M8
Bolts
G
Flat Washer
H
Lock Washers
I
Hex Nuts
Parts Detail
A
D
C
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
NOTE: This product is intended for residential, non-commercial use.
DESCRIPTION
B
E
F
G
H
1
QUANTITY
1
Install Studs to Left and Right Leg/Arms
1
(See Figure 1)
1
1. Install 2 threaded M8 Studs (E) into Left
1
Leg/Arm (C) with slotted end of stud
4
pointing outwards.
4
2. Repeat Step 1 with the Right Leg/Arm (D).
8
8
4
Attach Seat to Right and Left Leg/Arm
of Chair
(See Figure 2)
1. Slide the Seat (B) onto studs in the Right
Leg/Arm through the bolt holes in mounting
tabs located on the side of the Seat (B).
Secure the Seat to the studs using Flat
Washer (G) first, then Lock washer (H) and
Hex Nut (I). Finger tighten the Hex Nuts (I).
Do not over tighten.
2. Repeat Step 1 with the Left Leg/Arm (C).
I
Attach Back to Seat and Leg/Arm Assembly
(See Figure 3)
1. Position the Chair Back (A) between the
Left (C) and Right (D) Leg/Arms at the rear
of the seat. Place Lock Washers (H) onto
the M8 Bolts (F) first, and then place Flat
Washers (G) onto the M8 Bolts. Thread the
M8 Bolts through the 4 holes located inside
of the Chair Back near the bottom and into
the 4 holes inside the Leg/Arm assembly.
Tighten the M8 Bolts until the bolt is seated
securely in the Leg/Arms with an open end
wrench. Do not force the bolts to turn . This
will strip the threads.
2. Tighten the Hex Nuts (I) on the studs under
the seat.
ASSEMBLY INSTRUCTIONS
Figure 1
C
Figure 2
I
H
B
Figure 3
F
H
G
2
E
D
E
G
D
G
H
I
A
D
B
C