DoorKing 1601-235 Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Abrepuertas DoorKing 1601-235. DoorKing 1601-235 6 páginas.

Imprimir página
Run Wire Harness (1601-345)
Choose which side of the operator the arm is mounted on, remove knock-out and run wire harness accordingly as shown.
Use supplied adhesive
zip tie to secure harness
to bottom of bracket.
Plug in reverse edge.
Use bottom hole on arm bracket to secure wire guard.
Install Arm Cover
IMPORTANT: Wire harness MUST
remain clear of the rotating arm and
the arm cover to avoid wire chaffing.
A r m
C o
v e r
Note for Older Covers:
See page 4.
1601-268-B-12-19
N e
a r
S i d
e
O p
t i o n
r e
W i
a r d
G u
IMPORTANT: Allow a loop in the
wire harness for rotating arm.
2
F a r
O p
K n
o c k
- O u
t
Note for Older Operators:
Wiring:
A 5/8" hole will have to be
See page 3.
drilled in the operator
cabinet approximately
where Knock-Out is
shown. Make sure 5/8"
hole is clear of all internal
components.
DO NOT operate arm with a
malfunctioning reverse edge.
S i d
e
t i o n
K n
o c k
- O u
t
IMPORTANT: Allow a loop in the
wire harness for rotating arm.