Canon PIXMA MX420 Series Solución de problemas de configuración de red - Página 8

Navegue en línea o descargue pdf Solución de problemas de configuración de red para Impresora todo en uno Canon PIXMA MX420 Series. Canon PIXMA MX420 Series 34 páginas. Cartridge reset
También para Canon PIXMA MX420 Series: Manual de instalación (24 páginas), Especificaciones (2 páginas), Manual de instalación en red (14 páginas), Manual de configuración de red (9 páginas), Puesta en marcha (29 páginas), Manual (4 páginas)

•

When using an access point that does not support WPS, configure settings manually. For the

procedure to configure settings of the machine manually, refer to "Wireless Setup Using Easy

Setup" in the printed manual: Getting Started.

Problems during Software Installation

Check

Check 1

For a wireless connection, make sure that you follow Check 1, 2, 3, 4, 5 and 8 of

"Connection Checklist" on page 15, then click Update (A).

For a wired connection, make sure that you follow Check 1, 2, 6, 7 and 8 of

"Connection Checklist" on page 15, then click Update (A).

Check 2

Is the machine connected to a network?

•

To confirm the connection status, press the Setup button, then using the { } [ ] and OK

buttons, select Device settings > LAN settings > Confirm LAN settings > WLAN setting list

or LAN setting list. Make sure that Connection is set to Active.

If the machine is not connected to a network, perform setup again by following the

procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed

manual: Getting Started.

•

Check Check the printer settings (B), click Next (C), then click Wireless LAN Setup

Information on the Check Printer Settings dialog box to display the access point information

stored on your computer. Refer to the information when configuring the network setting for the

machine. Wireless LAN Setup Information may not be displayed. (* Wireless connection only)