Astria Fireplaces 900005-07 Instrucciones de instalación - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación para Accesorios para chimeneas Astria Fireplaces 900005-07. Astria Fireplaces 900005-07 2 páginas. Framing standoff and vent gasket

Imprimir página

INNOVATIVE HEARTH PRODUCTS • SIGNATURE

Figure 2: Attaching the right side framing standoff

3. Align the left side of the framing standoff with the left side of

the fireplace (Figure 3). Secure the standoff with two (2) of

the included 5/16 in. screws in the holes closest the side of

the fireplace.

f i r e - p a r t s . c o m

NOTE: The ends of the framing standoffs will overlap.

Figure 3: Attaching the left side framing standoff

Screws

4. Position the center support as shown (Figure 4), with

the larger screw holes oriented to the bottom. Secure

with two (2) of the included 5/16 in. screws in the top

and two (2) 5/16 in. screws in the bottom of the center

support.

Innovative Hearth Products reserves the right

to make changes at any time, without notice,

in design, materials, specifications, prices and

also to discontinue colors, styles, and products.

Consult your local distributor for fireplace

Innovative Hearth Products, LLC.

P/N 900005-07 Rev. A 10/2014

SERIES DIRECT-VENT GAS FIREPLACES • ENVY/ENVY CD 35/40/45TEN • INSTALLATION INSTRUCTIONS

Screws

P900005-07

Figure 4: Installing the center support

TOP VENT ROPE GASKET INSTALLATION INSTRUCTIONS

1. Slide the rope gasket over the top vent component and

position it snugly against the apppliance (Figure 5).

Figure 5: Installing the rope gasket

AFTER INSTALLING THE KIT

1. Reinstall the media/logs (if applicable) and the glass door.

2. Refer to the Installation Instructions (P/N 900005-00)

for information regarding turning ON the gas supply,

reconnecting the power supply at the circuit breaker, and

additional framing information.

Screws

Rope Gasket

1508 Elm Hill Pike, Suite 108

Nashville, TN 37210

IHP.US.com