Canon iR1023 Series Procedimiento de instalación - Página 12
Navegue en línea o descargue pdf Procedimiento de instalación para Escáner Canon iR1023 Series. Canon iR1023 Series 20 páginas.
También para Canon iR1023 Series: Manual de servicio (29 páginas)
Imprimir páginaChapter 1
1.1.3 Installation Proce-
dure
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F /
iR1022i / iR1022iF /
1. Preparations for main body
1) Turn off the main power switch of the host machine
and disconnect the power plug from the outlet.
2) To release the hooks at the back of the machine,
move the machine backward until the hooks are
about 10 cm away from the edge of the desk and so
on.
3) Remove the screw [1].
4) Release the three claws[2] at the right and the three
claws [3] at the top.
5) Release the two claws [4] at the bottom, and then
detach the rear cover [5].
[1]
4
0013-4622
[3]
[2]
[5]
[4]
F-1-3
6) To release the hooks at the lower right of the ma-
chine, float the right side of the machine about 5 cm
above the edge of the desk and so on.
7) Release the two claws [1] at the rear back of the
right cover.
8) Using a flathead screwdriver, release the three
claws [2] at the top of the right cover.
[1]
9) Remove the claw [1] at the front, and then release
the two hooks [2] using a flathead screwdriver.
10) Remove right cover [4] in the direction of the ar-
row, and then detach the righy cover [4] by releas-
[2]
F-1-4