Canon iR1023 Series 설치 절차 - 페이지 12
{카테고리_이름} Canon iR1023 Series에 대한 설치 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon iR1023 Series 20 페이지.
Canon iR1023 Series에 대해서도 마찬가지입니다: 서비스 매뉴얼 (29 페이지)
페이지 인쇄Chapter 1
1.1.3 Installation Proce-
dure
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F /
iR1022i / iR1022iF /
1. Preparations for main body
1) Turn off the main power switch of the host machine
and disconnect the power plug from the outlet.
2) To release the hooks at the back of the machine,
move the machine backward until the hooks are
about 10 cm away from the edge of the desk and so
on.
3) Remove the screw [1].
4) Release the three claws[2] at the right and the three
claws [3] at the top.
5) Release the two claws [4] at the bottom, and then
detach the rear cover [5].
[1]
4
0013-4622
[3]
[2]
[5]
[4]
F-1-3
6) To release the hooks at the lower right of the ma-
chine, float the right side of the machine about 5 cm
above the edge of the desk and so on.
7) Release the two claws [1] at the rear back of the
right cover.
8) Using a flathead screwdriver, release the three
claws [2] at the top of the right cover.
[1]
9) Remove the claw [1] at the front, and then release
the two hooks [2] using a flathead screwdriver.
10) Remove right cover [4] in the direction of the ar-
row, and then detach the righy cover [4] by releas-
[2]
F-1-4