AKW MediCare 3000 Series Instrucciones de instalación y cuidado - Página 2
Navegue en línea o descargue pdf Instrucciones de instalación y cuidado para Equipamiento médico AKW MediCare 3000 Series. AKW MediCare 3000 Series 2 páginas. Seats
Imprimir página
NOTE: 3000 series seats are manufactured from mild steel which is treated for rust resistance and Polyester
Epoxy resin powder coted - Tested to ASTM B117-87 96 hour salt spray test. A warranty against rust is provided
by 4000 series seats only.
For further details on this and other AKW products please contact your distributor
DLP0030/3000UCINST/ISS01/0407
ALWAYS
read the installation instructions before installing
this product.
NEVER
exceed the weight capacity of 40 stone/ 560lb/ 254 Kg.
ALWAYS
read the end user care instructions.
ALWAYS
use hole reducers if cushions not used.
ALWAYS
have the seats installed by a trained and
experienced installer.
NEVER
stand on the shower seat.
These actions may reduce the strength of the shower
seat and will invalidate any warranty or weight capacity
stated.
BEWARE
A pinch hazard may be present during the closing
of this product up towards the wall.
DO NOT
place matches or cigarettes on or near this product.
The following plastic materials are used in this product:
Polypropylene(PP), Nylon (PA),
Thermoplastic Rubber (TPR)
High Density Polyethylene (HDPE)
Polyurethane Foam (PU)
No natural Rubber or Latex used in this product
- see details on outer packaging
© 2007 AKW MediCare Limited
04-004-015-01