DADISICK QT Series Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Sensores de seguridad DADISICK QT Series. DADISICK QT Series 15 páginas. Safety light curtain sensor emitter and receiver
Imprimir página(light curtain is low, human hand can reach out from the top of the light curtain)
A. The height position is one of the necessary conditions to ensure that the photoelectric protection device realizes
the protection function, and the height position must be ensured correctly during installation.
B. If the mold is replaced during use, the safety distance and height position must be readjusted according to the
above two requirements.
2. Setting of auxiliary protective measures
When the horizontal distance between the light cu ain plane of the photoelectric protection device and the front end
of the mold base exceeds 400mm, auxilia
operator's body from entering the inside of the light cu ain plane. When it is less than 400mm, safety measures such
as auxilia
photoelectric or protective fence can also be taken.
DONGGUAN DADI ELECTRONIC TECHNOLOGY CO., LTD
Website:
www.dadisick.com
Upper mold
Protection height:H
Lower mold
Incorrect installation position
photoelectric or protective fences should be installed to prevent the
Protection height:H
Upper mold
Lower mold
Incorrect installation position
(too far from the die port for people to enter the danger zone)
Email:
SAFETY LIGHT CURTAIN USER'S MANUAL
Installation distance =Ds
WARNING
Installation distance =Ds
We rese e the right to make technical changes
2023-04-11
15