DADISICK QT Series 사용자 설명서 - 페이지 15

{카테고리_이름} DADISICK QT Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DADISICK QT Series 15 페이지. Safety light curtain sensor emitter and receiver

(light curtain is low, human hand can reach out from the top of the light curtain)

A. The height position is one of the necessary conditions to ensure that the photoelectric protection device realizes

the protection function, and the height position must be ensured correctly during installation.

B. If the mold is replaced during use, the safety distance and height position must be readjusted according to the

above two requirements.

2. Setting of auxiliary protective measures

When the horizontal distance between the light cu ain plane of the photoelectric protection device and the front end

of the mold base exceeds 400mm, auxilia

operator's body from entering the inside of the light cu ain plane. When it is less than 400mm, safety measures such

as auxilia

photoelectric or protective fence can also be taken.

DONGGUAN DADI ELECTRONIC TECHNOLOGY CO., LTD

Website:

www.dadisick.com

Upper mold

Protection height:H

Lower mold

Incorrect installation position

photoelectric or protective fences should be installed to prevent the

Protection height:H

Upper mold

Lower mold

Incorrect installation position

(too far from the die port for people to enter the danger zone)

Email:

SAFETY LIGHT CURTAIN USER'S MANUAL

Installation distance =Ds

WARNING

Installation distance =Ds

We rese e the right to make technical changes

2023-04-11