Canon LV-7325U Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Proyector Canon LV-7325U. Canon LV-7325U 48 páginas. Canon multimedia projector owner's manual lv-7325u
Imprimir página
SETTING-UP THE PROJECTOR
This projector is designed to project on a flat projection surface.
The projector can be focused from 4.6'(1.4m) ~ 35.4'(10.8m).
Refer to the figure below to adjust the screen size.
30"
Screen Size
(W x H) mm
610 x 457
Height (H1)
17.1"(435mm)
Height (H2)
0.9"(22mm)
ROOM LIGHT
The level of brightness in a room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to provide the best image.
Picture tilt and projection angle can be adjusted by
rotating the ADJUSTABLE FEET. Projection angle can
be adjusted to 10 degrees.
Lift the front of the projector and pull the FEET LOCK
1
LATCHES on both sides of the projector.
Release the FEET LOCK LATCHES to lock the
2
ADJUSTABLE FEET and rotate the ADJUSTABLE
FEET to fine tune the position and the tilt.
3
To shorten the ADJUSTABLE FEET, lift the front of the
projector and pull and undo the FEET LOCK LATCHES.
The position and the keystone distortion of the image
can also be adjusted using the Menu Operation. (Refer
to pages 21, 29, 30 and 37.)
POSITIONING THE PROJECTOR
11.8' (3.6m)
4.6' (1.4m)
100"
40"
77"
30"
60"
1219 x 914
2032 x 1524
34.3"(870mm)
57.1"(1451mm)
1.7"(44mm)
2.9"(73mm)
ADJUSTABLE FEET
24.0' (7.3m)
18.0' (5.5m)
200"
150"
154"
115"
100"
150"
3048 x 2286
85.7"(2177mm)
114.3"(2903mm)
4.3"(109mm)
ADJUSTABLE FEET
PREPARATION
35.4' (10.8m)
300"
231"
H1
H2
200"
300"
4064 x 3048
6096 x 4572
171.4"(4354mm)
5.7"(145mm)
8.6"(218mm)
FEET LOCK
LATCHES
7