Canon LV-7325U Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Proyector Canon LV-7325U. Canon LV-7325U 48 páginas. Canon multimedia projector owner's manual lv-7325u

Imprimir página

PREPARATION

This projector uses nominal input voltages of 100-120 V

AC. The projector automatically selects the correct

input voltage. It is designed to work with single-phase

power systems having a grounded neutral conductor.

To reduce the risk of electrical shock, do not plug into

any other type of power system.

Consult your authorized dealer or service station if your

are not sure of the type of power supply in use.

Connect the projector with the peripheral equipment

before turning the projector on. (Refer to pages 10 ~ 13

for connection.)

CAUTION

For safety, unplug the AC Power Cord when the

appliance is not in use.

When this projector is connected to the outlet with

the AC Power Cord, the appliance is in Stand-by

Mode and consumes some electric power.

This projector is equipped with cooling fans for protection from overheating. Pay attention to the following to

ensure proper ventilation and avoid a possible risk of fire and malfunction.

Do not cover the vent slot.

Keep the rear grill at least 3 feet (1m) away from any

object.

Keep sides clear of any obstructions. Obstructions

may block cooling air.

CONNECTING THE AC POWER CORD

VENTILATION

Connect the AC power supply cord (supplied) to the

projector.

The socket-outlet must be near this equipment and

must be easily accessible.

Projector side (Female)

AC outlet side (Male)

EXHAUST VENT

(REAR SIDE)

AIR INTAKE VENTS

(BOTH SIDES)