Bolton Tools HP-L4G Manual de instalación, uso y mantenimiento - Página 6

Navegue en línea o descargue pdf Manual de instalación, uso y mantenimiento para Sistemas de elevación Bolton Tools HP-L4G. Bolton Tools HP-L4G 16 páginas. Two-post model autolift

Imprimir página

NSTALLATION

IMPORTANT

: Always wear safety glasses while installing lift.

OOLS

(MINIMUM REQUIRED)

a. Banding Cutter

b. Tape measure,

c. Chalk line

d. level

e. adjustable wrench

Standard open end wrenches

g. Needle nose pliers

h. Hammer drill with diameter carbide

hammer

Torque wrench

k. Step ladder

Anti-Seize lubricant (for arm pins)

AYOUT

1. Layout the service bay according to the architect's plans or owners instructions. Be certain that the

proper conditions exist.

2. Assemble column extension to column using M12× 30 Hex bolt. Repeat for opposite column and

extension.

3. Using the Overall Width(C) as a guideline, chalk two parallel on the concrete floor within 1/8 inch

tolerance.

4. Determine the location of the Column Ass'y on either chalk line and mark the base plate dimension

Overall Width(L) .

Fig 2 – Floor Plan