Battery Power Solutions Freedom V2 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Accesorios para cámaras Battery Power Solutions Freedom V2. Battery Power Solutions Freedom V2 20 páginas. Cpap battery

Imprimir página

Battery Charging

The Freedom

device original power supply or the Freedom

Your PAP device power supply will either connect directly to the battery

or via a Power Supply Adapter included in the battery kit (see pages

Battery charge times are based on the wattage of the power supply

being used: 2-3 hours@ 90W

*charge times are when the battery is fully depleted (0%)

Accessories are also available to charge the Freedom V

vehicle or by using solar power (see page 3),

General Notes & International Charging

■ It is normal for the power supply and the battery to be slightly

warm to the touch during the charging process.

The digital display screen will show the charge level of the battery.

■

Press the charge level/reset button to illuminate the screen.

When the battery is at 0% it may take some time before the display

■

screen begins to show a charge level during which time the screen

may flash.

If the display screen flashes but does not show a charge level then

■

disconnect the power supply, press the charge level/reset button

and then reconnect the power supply to resume charging.

When charging is complete disconnect the power supply from the

■

wall outlet and the battery.

If the power supply being used to charge the Freedom

■

accepts current from 100-240V AC and 50/60 Hz then only an

electrical adapter plug is needed to charge in any country.

Single Battery Charging

Plug the power supply into the battery DC IN port and then into the

■

wall outlet to begin the charging process.

• If a Power Supply Adapter is required, plug it into the battery

DC IN port and then into the PAP device power supply.

battery is designed to be charged using your PAP

3-4 hours@ 60W

power supply.

8-9 hours@ 20W

1-2).

battery in a

battery