Battery Power Solutions Freedom V2 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для фотоапаратів Battery Power Solutions Freedom V2. Battery Power Solutions Freedom V2 20 сторінок. Cpap battery
Друкувати сторінкуBattery Charging
The Freedom
device original power supply or the Freedom
Your PAP device power supply will either connect directly to the battery
or via a Power Supply Adapter included in the battery kit (see pages
Battery charge times are based on the wattage of the power supply
being used: 2-3 hours@ 90W
*charge times are when the battery is fully depleted (0%)
Accessories are also available to charge the Freedom V
vehicle or by using solar power (see page 3),
General Notes & International Charging
■ It is normal for the power supply and the battery to be slightly
warm to the touch during the charging process.
The digital display screen will show the charge level of the battery.
■
Press the charge level/reset button to illuminate the screen.
When the battery is at 0% it may take some time before the display
■
screen begins to show a charge level during which time the screen
may flash.
If the display screen flashes but does not show a charge level then
■
disconnect the power supply, press the charge level/reset button
and then reconnect the power supply to resume charging.
When charging is complete disconnect the power supply from the
■
wall outlet and the battery.
If the power supply being used to charge the Freedom
■
accepts current from 100-240V AC and 50/60 Hz then only an
electrical adapter plug is needed to charge in any country.
Single Battery Charging
Plug the power supply into the battery DC IN port and then into the
■
wall outlet to begin the charging process.
• If a Power Supply Adapter is required, plug it into the battery
DC IN port and then into the PAP device power supply.
v
2
battery is designed to be charged using your PAP
I
3-4 hours@ 60W
6
v
2
power supply.
I
8-9 hours@ 20W
2
v
1-2).
battery in a
2
battery